Display Supplier &
Manufacturer
Carrier boards extend COM and SOM modules with the connectors, interfaces and signals required by a specific industrial device. They make it possible to build a complete embedded platform around a selected computing module, adding options such as Ethernet, USB, HDMI, LVDS, RGB, touch panel interfaces and other application-specific connections.
17 results
Engicam
| Interface | LVDS |
| Operating temp. (°C) | -40 ~ 85 |
| Ports | CAN - 1, Ethernet - 1, I²C - 1, LVDS - 1, UART - 1 |
| Connectivity | Ethernet, UMTS 3G, Wi-Fi |
| Manufacturer | Engicam |
| Operating System | Linux |
Engicam
| Interface | HDMI |
| Operating temp. (°C) | -20 ~ 70 |
| Ports | Ethernet - 1, HDMI - 1, USB - 3 |
| Manufacturer | Engicam |
| Operating System | Android, Linux |
SoMLabs
| Interface | I²C, RGB, USB, CAN, Ethernet, MCU, MIPI, RS485, UART |
| Voltage | 9-12V DC |
| Ports | CAN-FD - 1, MIPI-DSI - 1, USB Host - 1, USB OTG - 1, Ethernet - 1, I²C - 1, RGB - 1, RS485 - 1 |
| Special | 5 Pushbuttons, 5 LEDs, Audio codec, ST-Link debugger, Parallel camera interface, CR1220 battery socket, GPIO 2x40 expansion, QSPI connector, uSD card slot |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | JTAG, I²C, RGB, USB, Ethernet, UART |
| Voltage | 5V DC, 9-12V DC |
| Operating temp. (°C) | 0 ~ 70 |
| Ports | RGB LCD - 1, USB Console - 1, USB Host - 1, USB Micro AB - 1, Ethernet - 1 |
| Special | 5 Pushbuttons, 5 LEDs, Boot selector, Arduino Uno Rev. 3 compatible, Raspberry Pi compatible |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | MIPI-CSI, MIPI-DSI, PCIe, I²C, SPI, USB, Ethernet, UART |
| Voltage | 9-12V DC |
| Operating temp. (°C) | 0 ~ 70 |
| Ports | MicroSD - 1, MIPI-CSI - 1, MIPI-DSI - 1, USB Console - 1, USB Host - 1, USB OTG - 1, Ethernet - 1, PCIe - 1 |
| Special | 6 Pushbuttons, 6 LEDs, Segger J-Link debugger, Raspberry Pi compatible, Arduino Uno compatible |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | Bluetooth, eMMC, JTAG, I²C, RGB, SPI, USB, Ethernet, RS232, UART, Wi-Fi |
| Voltage | 9-12V DC |
| Operating temp. (°C) | -40 ~ 85 |
| Ports | JTAG - 1, Ethernet - 1, I²C - 1, UART - 5, USB - 2 |
| Special | 2 LEDs, RTC with backup battery, 50-pin GPIO connector, 50-pin RGB LCD connector, Terminal block power input |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | Bluetooth, eMMC, I²C, RGB, USB, Ethernet, UART, Wi-Fi |
| Voltage | 5V DC, 9-12V DC |
| Operating temp. (°C) | 0 ~ 70 |
| Ports | RGB LCD - 1, USB Console - 1, USB Host - 1, USB OTG - 1, Ethernet - 1 |
| Special | 5 Pushbuttons, 5 LEDs, Boot selector, Arduino Uno Rev. 3 compatible, Raspberry Pi compatible |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | PCIe 3.0, RS-485, LVDS, HDMI, I²C, SPI, USB, CAN, Ethernet, MIPI, UART |
| Voltage | 9-12V DC |
| Operating temp. (°C) | -40 ~ 85 |
| Ports | CAN-FD - 2, GPIO - 1, M.2 - 1, MicroSD - 1, MIPI-CSI - 2, MIPI-DSI - 1, RS-485 - 1, USB 3.0 - 1, USB-C - 1, Ethernet - 2, HDMI - 1, LVDS - 2 |
| Special | 5 Pushbuttons, 7 LEDs, Segger J-Link debugger, 24-bit audio codec, M.2 key M socket (2242/2260/2280) |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | PCIe, LVDS, HDMI, I²C, SPI, USB, CAN, Ethernet, MIPI, RS485, UART |
| Voltage | 9-12V DC |
| Operating temp. (°C) | 0 ~ 70 |
| Ports | CAN FD - 1, MicroSD - 1, MIPI-CSI - 1, MIPI-DSI - 1, PCIe M.2 - 1, SPI - 2, USB - 1, USB-OTG - 1, Ethernet - 1, HDMI - 1, I²C - 3, LVDS - 1, RS485 - 1, UART - 3 |
| Special | 6 Pushbuttons, 6 LEDs, Segger J-Link debugger, 24-bit audio codec, On-board RTC with battery socket, Boot selector |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | eMMC, I²C, RGB, SPI, USB, Ethernet, MIPI, UART |
| Voltage | 9-12V DC |
| Operating temp. (°C) | 0 ~ 70 |
| Ports | MIPI-DSI - 1, Ethernet - 1, I²C - 1, RGB - 1, SPI - 1, UART - 3, USB - 2 |
| Special | 3 Pushbuttons, 5 LEDs, Boot selector, Raspberry Pi compatible, ST-Link/v2-1 debugger, MicroSD card socket, RTC battery socket |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | MIPI-CSI, MIPI-DSI, I²C, SPI, USB, CAN, Ethernet, RS485, UART |
| Voltage | 9-12V DC |
| Operating temp. (°C) | 0 ~ 70 |
| Ports | Audio Jack - 1, JTAG - 1, MicroSD - 1, MIPI-CSI - 1, MIPI-DSI - 1, UART - 6, USB Host - 1, USB-OTG - 1, CAN - 1, Ethernet - 1, I²C - 3, RS485 - 1, SPI - 1 |
| Special | 5 Pushbuttons, 5 LEDs, Boot selector, 24-bit audio codec, CR2032 RTC battery socket, Mbed SWDAP debug probe, GPIO expansion headers (GPIO-SNVS, GPIO-COMM1, GPIO-COMM2) |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | LVDS, I²C, SPI, USB, CAN, Ethernet, MIPI, RS485, UART |
| Voltage | 9-12V DC |
| Operating temp. (°C) | 0 ~ 70 |
| Ports | Audio - 1, MIPI-CSI - 1, MIPI-DSI - 1, CAN - 1, Ethernet - 2, I²C - 3, LVDS - 1, RS485 - 1, USB - 2 |
| Special | 4 Pushbuttons, 5 LEDs, Boot selector, RECOVERY jumper, MicroSD socket, Audio codec, GPIO expansion connectors (1.8V and 3.3V) |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | QSPI, I²C, RGB, SPI, USB, Ethernet, UART |
| Voltage | 9-12V DC |
| Operating temp. (°C) | 0 ~ 70 |
| Ports | RGB Display - 1, USB Console - 1, USB Host - 1, USB OTG - 1, Ethernet - 1, I²C - 1, UART - 3 |
| Special | 5 Pushbuttons, 7 LEDs, Boot selector, 2x20 GPIO connector, 2x5 QSPI connector, 50-pin RGB display interface, Raspberry Pi 3 compatible connector |
| Manufacturer | SoMLabs |
SoMLabs
| Interface | I²C, SPI, USB, CAN, Ethernet, MIPI, RS485, UART |
| Voltage | 9-12V DC |
| Operating temp. (°C) | 0 ~ 70 |
| Ports | ADC+GPIO Header - 1, Audio Jack 3.5mm - 1, Ethernet RJ45 - 1, GMII Header - 1, MIPI-CSI - 1, MIPI-DSI - 1, Raspberry Pi Header - 1, RS-485 - 1, USB Console - 1, USB Micro AB - 1, USB Type A - 1, CAN - 1 |
| Special | 4 Pushbuttons, 4 LEDs, Raspberry Pi compatible, MIPI-DSI display connector, MIPI-CSI camera connector, Audio codec with headphone and microphone jack, Recovery jumper |
| Manufacturer | SoMLabs |
Engicam
| Interface | LVDS, RGB |
| Operating temp. (°C) | -20 ~ 85 |
| Ports | CAN - 1, Ethernet - 1, I²C - 1, I²S - 1, LVDS - 1, RGB - 1, SDIO - 2x4bit, SPI - 1, UART - 3, USB - 2 |
| Manufacturer | Engicam |
| Operating System | Android, Linux |
Engicam
| Interface | LVDS |
| Operating temp. (°C) | -40 ~ 85 |
| Ports | CAN - 1, Ethernet - 1, I²C - 2, I²S - 1, LVDS - 1, SDIO - 2x4bit, SPI - 1, UART - 3, USB - 2 |
| Manufacturer | Engicam |
| Operating System | Android, Linux |
Engicam
| Interface | DP, HDMI, DVI, eDP |
| RAM | max 8 GB |
| Ports | I²C - 1, PCIe - 1, RS232 - 1, RS485 - 1, USB - 4 |
| Manufacturer | Engicam |
| Operating System | Linux, Windows 10 |
A carrier board is selected according to the computing module, required I/O set, display interface, power supply and mechanical layout of the final device. It can significantly reduce development time because the core processor module remains separate from the application-specific electronics. This approach is useful when one product family needs several hardware variants based on the same computing platform.
Carrier boards are often used together with COM and SOM modules, displays and touch panels. In projects where space, thermal design or signal routing is critical, Unisystem can help compare available carrier boards with a custom electronics approach.